Standard Technical Specification:-• Fixed height warmer with attached baby cradle anddrawers mounted on 4" (100mm) wheels, 2 withbrake.• Stainless steel baby tray with water proof, zippedcover mattress of density approx. 21-25 kg/m³• Continuous head up/down facility• X-Ray cassette holder• Collapsible/lockable Side Supports made up ofUnbreakable polycarbonate material• Slots for sensor and ventilator tubing• Side tray for placement of monitor• Stainless steel infusion rod with facility to mountSyringe/infusion pump• Lower shelf below baby tray to facilitate undersurface phototherapy, Facility of 3 drawers forstorage• Height : 74.5" (1890 mm), Width : 28.0" (710 mm),Length : 39.0" (990 mm)• Bed to Floor Height : 37.5" (950 mm)• Distance between baby bed and heater: 33" (840mm)• Mattress size: 30" (762 mm) x 20" (508 mm)• Height of side panel above baby bed: 5.75" (145mm)Performance/Electrical Specifications :• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes• LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.• LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)• Modes of Operation: Skin Servo, Air, Manual and Pre-Warm• Keypad lock facility• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C• Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activatedduring Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Timeduration:30mins• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflectorwith a safety grill & Halogen observation light (12V/50W) for observing the baby• Operating Voltage: 220-240 VAC, 50Hz, Power: 800W (Max.)• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as followsAlarm Condition : Alarm Messages on LCDSkin Sensor is unplugged /Faulty : SKIN SENSOR FAILAir Sensor is unplugged /Faulty : AIR SENSOR FAILMeasured skin temperature higher than set temperature by 1.0°C : SKIN TEMP. HIGHMeasured skin temperature lower than set temperature by 1.0°C : SKIN TEMP. LOWMeasured skin temperature higher than 38.0°C (With cut-off) : SKIN OVER RANGEMeasured skin temperature lower than 34.0°C : SKIN UNDER RANGEMeasured air temperature higher than set temperature by 1.5°C : AIR TEMP. HIGHMeasured air temperature lower than set temperature by 3.0°C : AIR TEMP. LOWMeasured air temperature higher than 39.0°C (With cut-off) : AIR OVER RANGEHeater power is 100% for more than 15mins : CHK SENS POSITIONHeater is unplugged or faulty : HEATER OPENHeater Power drive fail/uncontrollable : CHK. PWR. DRIVEPower Fail Alarm: Audio with LED indicator